My father's bungalow has noticeable discoloured patches on the wall over where the chimney used to be, and some peeling wallpaper, presumably caused by damp.
What's the best way to go about dealing with this - does he need a builder/roofer to identify and eliminate the source of damp into the property, then replaster, or is there a simpler way?
Got a credit card? use our Credit Card & Finance Calculators
Thanks to Wasron,jfgw,Rhyd6,eyeball08,Wondergirly, for Donating to support the site
Damp on walls - how to deal with it?
-
- Lemon Quarter
- Posts: 2145
- Joined: November 4th, 2016, 12:12 pm
- Has thanked: 1078 times
- Been thanked: 1091 times
-
- Lemon Quarter
- Posts: 3786
- Joined: November 6th, 2016, 10:25 pm
- Has thanked: 1193 times
- Been thanked: 1982 times
Re: Damp on walls - how to deal with it?
No.
You need to work out where it is coming from, and stop it coming in. If an old chimney then if there is anything left on the roof that is where to start. If it is a chimney in the middle of the property (rather than on a party wall) it might be best to take it down to below roof level and then re-tyle the gap.
THEN you can start to look at repairing the damage. Any other approach will just mean the damp spreads behind the cover up and emerges elsewhere. Of course if he is moving, you can slap 6 coats of damp proof paint and paper over it and hope the surveyor doesn't spot it. DAMHIK
Paul
You need to work out where it is coming from, and stop it coming in. If an old chimney then if there is anything left on the roof that is where to start. If it is a chimney in the middle of the property (rather than on a party wall) it might be best to take it down to below roof level and then re-tyle the gap.
THEN you can start to look at repairing the damage. Any other approach will just mean the damp spreads behind the cover up and emerges elsewhere. Of course if he is moving, you can slap 6 coats of damp proof paint and paper over it and hope the surveyor doesn't spot it. DAMHIK
Paul
-
- Lemon Pip
- Posts: 96
- Joined: November 4th, 2016, 9:14 pm
- Has thanked: 71 times
- Been thanked: 34 times
Re: Damp on walls - how to deal with it?
? Residual compounds of combustion ? which may be impossible to remove and difficult to mask.
If so they may be hygroscopic leading to enduring damp on adjacent surfaces.
However, that^ is just speculation . . .. It's difficult to say really without a detailed description ( & photo ).
If so they may be hygroscopic leading to enduring damp on adjacent surfaces.
However, that^ is just speculation . . .. It's difficult to say really without a detailed description ( & photo ).
-
- Lemon Half
- Posts: 7203
- Joined: November 24th, 2016, 3:29 am
- Has thanked: 1666 times
- Been thanked: 3840 times
Re: Damp on walls - how to deal with it?
malakoffee wrote:? Residual compounds of combustion ? which may be impossible to remove and difficult to mask.
If so they may be hygroscopic leading to enduring damp on adjacent surfaces.
However, that^ is just speculation . . .. It's difficult to say really without a detailed description ( & photo ).
That nice Mr Occam thinks it is nothing more complicated than rain coming down the chimney.
-
- Lemon Half
- Posts: 7383
- Joined: February 7th, 2017, 9:36 pm
- Has thanked: 10514 times
- Been thanked: 4659 times
Re: Damp on walls - how to deal with it?
zico wrote:My father's bungalow has noticeable discoloured patches on the wall over where the chimney used to be, and some peeling wallpaper, presumably caused by damp.
What's the best way to go about dealing with this - does he need a builder/roofer to identify and eliminate the source of damp into the property, then replaster, or is there a simpler way?
When was the chimney removed?
Has the chimney been removed completely or down to a height? What height?
Is it on the side elevation or the middle of the roof?
Has anyone done any work to attached houses or is it a detached home?
Photo's would help to identify the issue and thus sort a solution
AiY(D)
-
- Lemon Quarter
- Posts: 2145
- Joined: November 4th, 2016, 12:12 pm
- Has thanked: 1078 times
- Been thanked: 1091 times
Re: Damp on walls - how to deal with it?
Just to clarify, the chimney wasn't removed, it just hasn't been in use for many years (there's just a gas fire there). The damp is just around and above the fireplace.
-
- Lemon Half
- Posts: 8427
- Joined: January 7th, 2017, 9:56 am
- Has thanked: 1549 times
- Been thanked: 3445 times
-
- Lemon Half
- Posts: 7203
- Joined: November 24th, 2016, 3:29 am
- Has thanked: 1666 times
- Been thanked: 3840 times
Re: Damp on walls - how to deal with it?
zico wrote:Just to clarify, the chimney wasn't removed, it just hasn't been in use for many years (there's just a gas fire there). The damp is just around and above the fireplace.
As there is a gas fire there, may we surmise it is still in use? Or has it fallen into disuse?
If it is never used, the first thing to do to address the damp problem is to cap the chimney to stop rain ingress. If your father wants to continue using the gas fire then probably a flue liner needs installing to start with.
Then if necessary, treat the chimney breast as though hygroscopic salts are the cause, as suggested in the link provided by monarbi.
-
- Lemon Half
- Posts: 5843
- Joined: November 4th, 2016, 11:22 am
- Has thanked: 4192 times
- Been thanked: 2602 times
Re: Damp on walls - how to deal with it?
So is the gas fire just venting up the old flue, or is there a liner?
If the gas fire is disused and it's the old flue with an open clay pot on top, that needs an elephant's foot cap, or a half tile cap like this https://www.belowstairs.co.uk/acatalog/Antique%20Modern%20Terracotta%20Chimney%20Cap%20CP139.jpg - any builders' merchant.
If the gas fire is still in use, I would prefer the half-tile version as it has a greater open area, but as Mike says, a flue liner is better.
If there is already a liner with a gas terminal then the water is getting in through degraded pointing or flaunching or missing or defective flashings. Pop up there and take a look.
Once you have stopped the water getting in leave it a year to dry out, then remove the wallpaper and cover the offending area with Foildamp, then re-paper over it.
Foildamp will stop the soot stains leaching through. They can otherwise be very persistent.
https://www.brewers.co.uk/product/FA1405E
V8
If the gas fire is disused and it's the old flue with an open clay pot on top, that needs an elephant's foot cap, or a half tile cap like this https://www.belowstairs.co.uk/acatalog/Antique%20Modern%20Terracotta%20Chimney%20Cap%20CP139.jpg - any builders' merchant.
If the gas fire is still in use, I would prefer the half-tile version as it has a greater open area, but as Mike says, a flue liner is better.
If there is already a liner with a gas terminal then the water is getting in through degraded pointing or flaunching or missing or defective flashings. Pop up there and take a look.
Once you have stopped the water getting in leave it a year to dry out, then remove the wallpaper and cover the offending area with Foildamp, then re-paper over it.
Foildamp will stop the soot stains leaching through. They can otherwise be very persistent.
https://www.brewers.co.uk/product/FA1405E
V8
Who is online
Users browsing this forum: No registered users and 25 guests