I need to re-wire a rather non-standard heating system which has developed an electrical malfunction. I have failed to trace the fault as the massive wiring centre uses the "rats nest" method of connecting up about 150 conductors and three x 4-gang contactors (goodness knows why!) with no accompanying schematic or documentation, and I just can't work out how it (used to) work.
So the customer has elected to have me snip it all out and wire it up again in a logical way and produce a printed schematic of the circuitry for any future technicians wrestling with it.
So my question is, can anybody suggest a program for drawing a heating system wiring schematic please? I need it to have symbols for programmer, room and cylinder thermostats, motorised valves, contactors and pumps. On a Mac please. I've drawn my circuit diagram freehand in Biro on a bit of A4 copier paper, but it doesn't really look all that professional....
Much obliged if anyone can.
Got a credit card? use our Credit Card & Finance Calculators
Thanks to eyeball08,Wondergirly,bofh,johnstevens77,Bhoddhisatva, for Donating to support the site
Electrical schematic software
-
- Lemon Half
- Posts: 7180
- Joined: November 24th, 2016, 3:29 am
- Has thanked: 1658 times
- Been thanked: 3815 times
Re: Electrical schematic software
I had an answer right up to the point where you asked for Mac software......
My rather complex self-build has everything documented using Microsoft Visio which isn't available on Mac (I'm an electronics specialist and use this software professionally). I have heard good things about SmartDraw on Macs but have no personal experience.
My rather complex self-build has everything documented using Microsoft Visio which isn't available on Mac (I'm an electronics specialist and use this software professionally). I have heard good things about SmartDraw on Macs but have no personal experience.
-
- Lemon Half
- Posts: 8370
- Joined: November 8th, 2016, 5:56 am
- Has thanked: 4471 times
- Been thanked: 3601 times
Re: Electrical schematic software
Give https://app.diagrams.net/ a go
It's surprisingly capable, with decent libraries and has been around for years (formerly as draw.io)
-sd
It's surprisingly capable, with decent libraries and has been around for years (formerly as draw.io)
-sd
-
- Lemon Slice
- Posts: 942
- Joined: November 4th, 2016, 11:33 am
- Has thanked: 32 times
- Been thanked: 462 times
Re: Electrical schematic software
Going off at a tangent, I would suggest looking at the Honeywell Sundial system diagrams and picking an appropriate one.
Building a wiring system around a 10way terminal block strip (even with variations on the original sundial plan), means that any average heating technician can quickly figure out what's what, test and replace failed components using a basic diagram downloaded from the internet, or knowledge off the top of their head.
I've rewired two systems, one S-plan and a rat's nest of a Y-plan with the terminal strip cut into individual blocks.
https://heatingcontrols.honeywellhome.c ... -Diagrams/
The "Wiring Guide" is the holy grail...
Building a wiring system around a 10way terminal block strip (even with variations on the original sundial plan), means that any average heating technician can quickly figure out what's what, test and replace failed components using a basic diagram downloaded from the internet, or knowledge off the top of their head.
I've rewired two systems, one S-plan and a rat's nest of a Y-plan with the terminal strip cut into individual blocks.
https://heatingcontrols.honeywellhome.c ... -Diagrams/
The "Wiring Guide" is the holy grail...
-
- Lemon Quarter
- Posts: 4829
- Joined: November 4th, 2016, 2:24 pm
- Has thanked: 4854 times
- Been thanked: 2113 times
Re: Electrical schematic software
Yes they have a library in there called Fluid Power (ISO 1219) that appears I think to have the symbols Mike would like.servodude wrote:Give https://app.diagrams.net/ a go
It's surprisingly capable, with decent libraries and has been around for years (formerly as draw.io
Chris
-
- Lemon Half
- Posts: 7180
- Joined: November 24th, 2016, 3:29 am
- Has thanked: 1658 times
- Been thanked: 3815 times
Re: Electrical schematic software
pochisoldi wrote:Going off at a tangent, I would suggest looking at the Honeywell Sundial system diagrams and picking an appropriate one.
Building a wiring system around a 10way terminal block strip (even with variations on the original sundial plan), means that any average heating technician can quickly figure out what's what, test and replace failed components using a basic diagram downloaded from the internet, or knowledge off the top of their head.
I've rewired two systems, one S-plan and a rat's nest of a Y-plan with the terminal strip cut into individual blocks.
https://heatingcontrols.honeywellhome.c ... -Diagrams/
The "Wiring Guide" is the holy grail...
This system has a wet central heating boiler running a warm air handler and hot water cylinder, with a separate pump and motorised valve serving each circuit. Thank you, but I'm reasonably confident there won't be a Sundial plan to pick covering this! Besides I tend to wire up my systems from first principles rather than following a diagram. I need to produce a diagram of my wiring design to guide any others following on from me, not so I can wire it up in the first place.
I'll see if I can bung up a photo of the current rat's nest built up around a 24 strip of terminal blocks...
-
- Lemon Slice
- Posts: 942
- Joined: November 4th, 2016, 11:33 am
- Has thanked: 32 times
- Been thanked: 462 times
Re: Electrical schematic software
(Pochisoldi exits the stage, having realised that he hadn't checked who the original poster was)
Who is online
Users browsing this forum: No registered users and 36 guests