Internal Doors

[Andy46]

Hi,

I'm looking to get some new internal doors. My current doors are 1975mm D x 780 H x 35mm D

Unfortunately these seem to be a none standard size. Is there any cheaper option other than purchasing bespoke made doors?

Thanks
Andy

[staffordian]

Most internal doors can be trimmed a little for width and height.

The hollow ones perhaps less so, but if you check the spec it should tell you how much.

Thickness is often less of an issue, a slight difference either way might not be noticeable.

[dealtn]

Hi,

I'm looking to get some new internal doors. My current doors are 1975mm D x 780 H x 35mm D

Unfortunately these seem to be a none standard size. Is there any cheaper option other than purchasing bespoke made doors?

Thanks
Andy

See previous thread.

viewtopic.php?f=40&t=28407

As I said then, consider addressing the adjustment to the "hole" not the door.

[AsleepInYorkshire]

Hi,

I'm looking to get some new internal doors. My current doors are 1975mm D x 780 H x 35mm D

Unfortunately these seem to be a none standard size. Is there any cheaper option other than purchasing bespoke made doors?

Thanks
Andy

See previous thread.

viewtopic.php?f=40&t=28407

As I said then, consider addressing the adjustment to the "hole" not the door.

There are other alternatives on the same thread and dealtn has correctly pointed you in that direction.

AiY

[Andy46]

Hi

Thanks. I knew i'd posted that but couldn't find it. I obviously didn't look very hard

Thanks again