Got a credit card? use our Credit Card & Finance Calculators
Thanks to Anonymous,bruncher,niord,gvonge,Shelford, for Donating to support the site
Sticking down vinyl
-
- Lemon Half
- Posts: 6727
- Joined: November 4th, 2016, 6:10 pm
- Has thanked: 1062 times
- Been thanked: 2413 times
Sticking down vinyl
The floor in my kitchen/breakfast room is laid with two large abutting sheets of vinyl, with a fake wood strip pattern. The join in areas of heavy traffic is starting to lift and separate, made worse because I tend to trip on it. Any suggestions for what glue to use to fix it down? The floor underneath is concrete screed.
-
- Lemon Half
- Posts: 5964
- Joined: November 4th, 2016, 11:22 am
- Has thanked: 4328 times
- Been thanked: 2675 times
-
- Lemon Quarter
- Posts: 3704
- Joined: November 5th, 2016, 10:30 am
- Has thanked: 1 time
- Been thanked: 1244 times
Re: Sticking down vinyl
And what helps remove it I've tried working on reviving my kitchen floor and it takes massive effort to get the glue from the previous vinyl off.
-
- Lemon Slice
- Posts: 695
- Joined: February 23rd, 2023, 7:42 am
- Has thanked: 188 times
- Been thanked: 330 times
Re: Sticking down vinyl
Nimrod103 wrote:The floor in my kitchen/breakfast room is laid with two large abutting sheets of vinyl, with a fake wood strip pattern. The join in areas of heavy traffic is starting to lift and separate, made worse because I tend to trip on it. Any suggestions for what glue to use to fix it down? The floor underneath is concrete screed.
"Contact adhesive" will do the job and can be purchased in small quantities
https://www.toolstation.com/evo-stik-co ... ive/p95550
-
- Lemon Half
- Posts: 8291
- Joined: November 8th, 2016, 2:30 pm
- Has thanked: 2940 times
- Been thanked: 4049 times
Re: Sticking down vinyl
kempiejon wrote:And what helps remove it I've tried working on reviving my kitchen floor and it takes massive effort to get the glue from the previous vinyl off.
https://diy.evo-stik.co.uk/products/imp ... ve-cleaner. Some heavy solvents, though. Needs thorough ventilation, and not for people with breathing difficulties.
![Neutral :|](./images/smilies/icon_neutral.gif)
BJ
-
- Lemon Half
- Posts: 5964
- Joined: November 4th, 2016, 11:22 am
- Has thanked: 4328 times
- Been thanked: 2675 times
Re: Sticking down vinyl
kempiejon wrote:And what helps remove it I've tried working on reviving my kitchen floor and it takes massive effort to get the glue from the previous vinyl off.
This is a perennial problem on Flooring forums... often with no answer.
On another forum a posted commented that he got on well with petrol, until he tried heating the floor to accelerate the process.
V8 (he used a blowlamp)
Last edited by 88V8 on December 14th, 2023, 10:50 am, edited 1 time in total.
-
- Lemon Quarter
- Posts: 3704
- Joined: November 5th, 2016, 10:30 am
- Has thanked: 1 time
- Been thanked: 1244 times
Re: Sticking down vinyl
thanks bungeejumper, I've tried white spirit, isopropyl alcohol, WD40 but had most success with a soak with washing liquid and elbow grease.
-
- Lemon Quarter
- Posts: 2518
- Joined: November 18th, 2021, 11:57 am
- Has thanked: 2044 times
- Been thanked: 1229 times
Re: Sticking down vinyl
88V8 wrote:kempiejon wrote:And what helps remove it I've tried working on reviving my kitchen floor and it takes massive effort to get the glue from the previous vinyl off.
This is a perennial problem on Flooring forums... often with no answer.
On another forum a posted commented that he got on well with petrol, until he tried heating the floor to accelerate the process.
V8 (he used a blowlamp)
Darwin Award candidate, obviously.
-
- Lemon Slice
- Posts: 390
- Joined: November 4th, 2016, 12:18 pm
- Has thanked: 355 times
- Been thanked: 203 times
Re: Sticking down vinyl
Nimrod103 wrote:The floor in my kitchen/breakfast room is laid with two large abutting sheets of vinyl, with a fake wood strip pattern. The join in areas of heavy traffic is starting to lift and separate, made worse because I tend to trip on it. Any suggestions for what glue to use to fix it down? The floor underneath is concrete screed.
As mentioned above, contact adhesive is what is most commonly used I believe, but I would use the spray on stuff rather than a tin of it for this purpose.
https://www.screwfix.com/p/no-nonsense- ... 00ml/32657
https://www.toolstation.com/stick2-cont ... ive/p47790
-
- The full Lemon
- Posts: 10978
- Joined: November 4th, 2016, 8:17 pm
- Has thanked: 1505 times
- Been thanked: 3050 times
Re: Sticking down vinyl
BullDog wrote:88V8 wrote:This is a perennial problem on Flooring forums... often with no answer.
On another forum a posted commented that he got on well with petrol, until he tried heating the floor to accelerate the process.
V8 (he used a blowlamp)
Darwin Award candidate, obviously.
I was thinking, someone like Laurel & Hardy there.
Who is online
Users browsing this forum: No registered users and 5 guests