Got a credit card? use our Credit Card & Finance Calculators
Thanks to gpadsa,Steffers0,lansdown,Wasron,jfgw, for Donating to support the site
Replace Eurolock on ‘Double Turn’ Door Lock
-
- Lemon Quarter
- Posts: 1041
- Joined: November 5th, 2016, 12:26 pm
- Has thanked: 221 times
- Been thanked: 205 times
Replace Eurolock on ‘Double Turn’ Door Lock
My sister has asked me to replace her front door lock due to a key going missing. It’s a 40-year-old Everest metal-framed door whose lock can be turned twice for extra security. Can I assume that the cylinder is standard and it’s the multipoint mechanism which has the double-turn facility? (Only Eurolock one I’ve ever seen).
-
- Lemon Quarter
- Posts: 3203
- Joined: December 7th, 2016, 9:09 pm
- Has thanked: 358 times
- Been thanked: 1060 times
Re: Replace Eurolock on ‘Double Turn’ Door Lock
There was a earlier thread about Eurolock doors. However your big problem is the lost key.
With a key it's really easy to change the lock. Without one.. well you might have to pick the lock to change it. Though there is an alternative, as mentioned in that thread.
If it's a really cheap one you can destroy the lock, at which point you can use a screwdriver to operate it. Meaning that you can remove it broken bits.
How interested are you in doing it yourself? Without a key it's likely to be cheaper to pay a locksmith.
After all, you would have to pay a significant amount for the tools.
https://www.amazon.co.uk/Eventronic-17- ... 9hdGY&th=1
Then put the effort in.
Of course you could just try assuming that you don't need a key, but I think they are designed so that won't work.
viewtopic.php?p=593153#p593153
With a key it's really easy to change the lock. Without one.. well you might have to pick the lock to change it. Though there is an alternative, as mentioned in that thread.
If it's a really cheap one you can destroy the lock, at which point you can use a screwdriver to operate it. Meaning that you can remove it broken bits.
How interested are you in doing it yourself? Without a key it's likely to be cheaper to pay a locksmith.
After all, you would have to pay a significant amount for the tools.
https://www.amazon.co.uk/Eventronic-17- ... 9hdGY&th=1
Then put the effort in.
Of course you could just try assuming that you don't need a key, but I think they are designed so that won't work.
viewtopic.php?p=593153#p593153
-
- Lemon Slice
- Posts: 795
- Joined: November 4th, 2016, 6:49 pm
- Has thanked: 848 times
- Been thanked: 439 times
Re: Replace Eurolock on ‘Double Turn’ Door Lock
Make sure the lock is replaced with a decent one such as Avocet etc that is anti bump and anti snap. The cheaper brands are so vulnerable to break-ins.
-
- Lemon Quarter
- Posts: 3203
- Joined: December 7th, 2016, 9:09 pm
- Has thanked: 358 times
- Been thanked: 1060 times
Re: Replace Eurolock on ‘Double Turn’ Door Lock
Redmires wrote:Make sure the lock is replaced with a decent one such as Avocet etc that is anti bump and anti snap. The cheaper brands are so vulnerable to break-ins.
It is worth pointing out that all locks have their faults. This lock has the fault is that it requires that the construction materials are expensive. Cheap materials would be less of a problem with a cylinder or leaver lock.
I'd also point out the confusion between "lock" and bar/bolt. The OP is talking a double throw bolt. The lock is the bit that needs a key. Modern doors using the same lock, have the bolts or bars thrown by the door handle and the lock prevents the handle operating them. The same has always been true of safes.
Other than that, yes buy a good lock. Price it in coffees or pints of beer and the most expensive is really quite cheap, for what you want it to do.
-
- Lemon Quarter
- Posts: 1041
- Joined: November 5th, 2016, 12:26 pm
- Has thanked: 221 times
- Been thanked: 205 times
Re: Replace Eurolock on ‘Double Turn’ Door Lock
Urbandreamer wrote:There was a earlier thread about Eurolock doors. However your big problem is the lost key.
With a key it's really easy to change the lock. Without one.. well you might have to pick the lock to change it. Though there is an alternative, as mentioned in that thread.
…….
A key is available, she’s concerned that she’s lost the key ring she normally carries, but we’re keyholders for each other.
The question was just whether a ‘standard’ Eurolock cylinder would do the job or whether it might be somehow different. They’re a 5 minute job to remove so I suppose I can just take it out and have a look first.
Thanks all
[edit]
I hate the Avocet ones - I fitted them to our doors and I’ve lost count of the number of times the strong magnet in the key has dragged something else with it out of a pocket or handbag and surreptitiously dropped it into the garden on the way to the door. [/edit]
-
- Lemon Slice
- Posts: 409
- Joined: September 1st, 2018, 10:21 pm
- Has thanked: 233 times
- Been thanked: 122 times
Re: Replace Eurolock on ‘Double Turn’ Door Lock
quelquod wrote:Urbandreamer wrote:The question was just whether a ‘standard’ Eurolock cylinder would do the job or whether it might be somehow different. They’re a 5 minute job to remove so I suppose I can just take it out and have a look first.
The profiles of Eurocylinders are all the same, so no problem there.
Where they are non-standard is the length. To do it properly measure the length from the central retaining screw to each end.
Then order one the same.
Or if it sticks out by more than 5mm on any side, consider buying one 5mm shorter.
I would also buy a good quality one, with anti "bumping" and snapping features.
Who is online
Users browsing this forum: Hypster and 9 guests