Got a credit card? use our Credit Card & Finance Calculators
Thanks to Anonymous,bruncher,niord,gvonge,Shelford, for Donating to support the site
BEVs and water
-
- The full Lemon
- Posts: 10554
- Joined: November 4th, 2016, 9:33 am
- Has thanked: 3682 times
- Been thanked: 5338 times
BEVs and water
I was walking along a track with big dips and deep puddles this weekend and I thought:
batteries, high voltage, wiring and connectors, water: not a happy combination.
Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
Are there any/many stories of failures through water ingress? In fact, how is the battery bank sealed anyway?
*and before anyone says "its no different to an ICE, let me mention that I wouldn't hesitate to drive through a ford of known depth knowing that no harm would result provided I kept the revs up and the speed down
Arb.
batteries, high voltage, wiring and connectors, water: not a happy combination.
Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
Are there any/many stories of failures through water ingress? In fact, how is the battery bank sealed anyway?
*and before anyone says "its no different to an ICE, let me mention that I wouldn't hesitate to drive through a ford of known depth knowing that no harm would result provided I kept the revs up and the speed down
Arb.
-
- Lemon Half
- Posts: 8497
- Joined: January 7th, 2017, 9:56 am
- Has thanked: 1560 times
- Been thanked: 3460 times
Re: BEVs and water
https://www.wm-motor.com/en/news/detail/337.html
Interesting note from WM motors, a Chinese company.
"In China, most electric vehicles can attain an IP67 rating for their electronics and battery systems, with only a few achieving IP68 level, which means that the enclosure is dust tight and suitable for continuous immersion in water."
"WM Motor’s battery pack is one of the few to achieve the highest IP68 rating."
"What’s the difference between IP67 and IP68 for EV’s?
Electric vehicles with an IP67 rating can stand in water at a maximum depth of 1 meter for 30 minutes without any leakage or damage to the electronic components. IP68 rated vehicles can withstand harsher conditions for longer periods of time without any impact to the electronics. That’s to say that when faced with stagnant water during times of flooding, IP67 rated vehicles can already achieve a high level of resistance, however EV’s with a IP68 rating have a much more durable buffer against intrusion, which in turn leads to greater longevity and peace of mind for the vehicle owner."
Interesting note from WM motors, a Chinese company.
"In China, most electric vehicles can attain an IP67 rating for their electronics and battery systems, with only a few achieving IP68 level, which means that the enclosure is dust tight and suitable for continuous immersion in water."
"WM Motor’s battery pack is one of the few to achieve the highest IP68 rating."
"What’s the difference between IP67 and IP68 for EV’s?
Electric vehicles with an IP67 rating can stand in water at a maximum depth of 1 meter for 30 minutes without any leakage or damage to the electronic components. IP68 rated vehicles can withstand harsher conditions for longer periods of time without any impact to the electronics. That’s to say that when faced with stagnant water during times of flooding, IP67 rated vehicles can already achieve a high level of resistance, however EV’s with a IP68 rating have a much more durable buffer against intrusion, which in turn leads to greater longevity and peace of mind for the vehicle owner."
-
- Lemon Quarter
- Posts: 2313
- Joined: November 4th, 2016, 4:20 pm
- Has thanked: 1912 times
- Been thanked: 874 times
Re: BEVs and water
Arborbridge wrote:I was walking along a track with big dips and deep puddles this weekend and I thought:
batteries, high voltage, wiring and connectors, water: not a happy combination.
Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
Are there any/many stories of failures through water ingress? In fact, how is the battery bank sealed anyway?
*and before anyone says "its no different to an ICE, let me mention that I wouldn't hesitate to drive through a ford of known depth knowing that no harm would result provided I kept the revs up and the speed down
Arb.
Any help?
https://www.youtube.com/watch?v=QSR6Y2gNeI0
or if you get a cheap one...
https://www.youtube.com/watch?v=Y9plRzRZ_PY&t=40s
-
- 2 Lemon pips
- Posts: 227
- Joined: June 20th, 2017, 8:30 am
- Has thanked: 294 times
- Been thanked: 62 times
Re: BEVs and water
Arborbridge wrote:I was walking along a track with big dips and deep puddles this weekend and I thought:
batteries, high voltage, wiring and connectors, water: not a happy combination.
Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
Are there any/many stories of failures through water ingress? In fact, how is the battery bank sealed anyway?
*and before anyone says "its no different to an ICE, let me mention that I wouldn't hesitate to drive through a ford of known depth knowing that no harm would result provided I kept the revs up and the speed down
Arb.
The battery packs should be well sealed, but I remember a story of a plug being knocked out of a battery pack on a BEV, resulting in water ingress.
I also remember stories of Renault ICE cars with low air intakes having their engines completely destroyed by puddles you would expect most cars to traverse safely. That wouldn't happen to a BEV.
Another story I remember was comparing the wading depth according to the manufacturer for ICE and Electric variants of the same cars and the ICE cars had deeper wading depths.
One possible BEV advantage is that extra battery weight might reduce the risk of being swept away?
-
- The full Lemon
- Posts: 10554
- Joined: November 4th, 2016, 9:33 am
- Has thanked: 3682 times
- Been thanked: 5338 times
Re: BEVs and water
tsr2 wrote:One possible BEV advantage is that extra battery weight might reduce the risk of being swept away?
I wasn't thinking of a ford that deep
Arb.
-
- 2 Lemon pips
- Posts: 227
- Joined: June 20th, 2017, 8:30 am
- Has thanked: 294 times
- Been thanked: 62 times
Re: BEVs and water
Arborbridge wrote:Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
https://www.youtube.com/watch?v=jlfkdcUC3Z0
-
- Lemon Half
- Posts: 8262
- Joined: November 8th, 2016, 2:30 pm
- Has thanked: 2928 times
- Been thanked: 4040 times
Re: BEVs and water
tsr2 wrote:Arborbridge wrote:Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
https://www.youtube.com/watch?v=jlfkdcUC3Z0
Not forgetting the white Tesla which makes a short but very game splash at Rufford Mill (https://www.youtube.com/watch?v=lUYfTrXHK4U, about 40 seconds into the sequence). Big thanks to Mike4 at Beerpig's place, who first drew our collective attention to this delightful spectator sport.
Whereas my wife's ICE Polo killed its alternator by wading through six inches or so. You never can tell.
BJ
-
- Lemon Quarter
- Posts: 3257
- Joined: December 7th, 2016, 9:09 pm
- Has thanked: 369 times
- Been thanked: 1077 times
Re: BEVs and water
Arborbridge wrote:tsr2 wrote:One possible BEV advantage is that extra battery weight might reduce the risk of being swept away?
I wasn't thinking of a ford that deep
Arb.
How deep is "that deep"? At about sill level most IC cars will start to float.
For example a Nissan Qashqai has a wading depth of just 350mm, while the leaf has a wading depth of 700mm.
https://www.irishtimes.com/life-and-sty ... -1.4089565
Note 350mm is less than 14", just over a foot in old money.
-
- The full Lemon
- Posts: 10554
- Joined: November 4th, 2016, 9:33 am
- Has thanked: 3682 times
- Been thanked: 5338 times
Re: BEVs and water
tsr2 wrote:Arborbridge wrote:Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
https://www.youtube.com/watch?v=jlfkdcUC3Z0
Great video. Took me back to my days in Iceland wading through rivers. Fortunately, our group had three land rovers so if one got stuck in snow or water, we could use one of the others to winch out.
Arb.
-
- Lemon Half
- Posts: 9011
- Joined: November 4th, 2016, 9:06 am
- Has thanked: 1344 times
- Been thanked: 3726 times
Re: BEVs and water
Arborbridge wrote:tsr2 wrote:Arborbridge wrote:Has anyone, would anyone drive through a ford with a BEV*? Is anyone worried about big puddles and generous amounts of spray for hours?
https://www.youtube.com/watch?v=jlfkdcUC3Z0
Great video. Took me back to my days in Iceland wading through rivers. Fortunately, our group had three land rovers so if one got stuck in snow or water, we could use one of the others to winch out.
Arb.
If you like that sort of thing, this youtube channel is my guilty pleasure.
It features Matt and his family who make their living towing people out of difficult off road situations.
https://www.youtube.com/watch?v=q1DRxbuQHZw
John
EDIT Just changed the link to the latest recovery, really good one in deep snow, involving three winches and a snow cat!
-
- Lemon Quarter
- Posts: 1103
- Joined: November 4th, 2016, 1:12 pm
- Has thanked: 179 times
- Been thanked: 378 times
Re: BEVs and water
redsturgeon wrote:
Just changed the link to the latest recovery, really good one in deep snow, involving three winches and a snow cat!
I am clearly a wimp. They are willing to stand a lot closer than I am to cables under strain ( see around 12:15-12:30 in the clip.
-
- Lemon Half
- Posts: 9011
- Joined: November 4th, 2016, 9:06 am
- Has thanked: 1344 times
- Been thanked: 3726 times
Re: BEVs and water
genou wrote:redsturgeon wrote:
Just changed the link to the latest recovery, really good one in deep snow, involving three winches and a snow cat!
I am clearly a wimp. They are willing to stand a lot closer than I am to cables under strain ( see around 12:15-12:30 in the clip.
This was covered in the video at about 18.00
https://www.youtube.com/watch?v=Lk3pPkGME4c
Not sure if they are talking sense but I guess these guys have been doing this stuff for a long time.
John
-
- Lemon Quarter
- Posts: 1103
- Joined: November 4th, 2016, 1:12 pm
- Has thanked: 179 times
- Been thanked: 378 times
Re: BEVs and water
redsturgeon wrote:
Not sure if they are talking sense but I guess these guys have been doing this stuff for a long time.
John
Another new thing learnt. They're all still here, so they must know something.
-
- Lemon Half
- Posts: 8262
- Joined: November 8th, 2016, 2:30 pm
- Has thanked: 2928 times
- Been thanked: 4040 times
Re: BEVs and water
genou wrote:Another new thing learnt. They're all still here, so they must know something.
The laws of probability, I imagine. When a stressed steel cable does its one-in-a-thousand failure thing, you might not be around long enough to count the milliseconds.
Professionally, I'm sure those guys use the very highest quality cables, lovingly stored and regularly tested and inspected. In the real world, I can do no better than to just hope so.
BJ
-
- Lemon Half
- Posts: 9011
- Joined: November 4th, 2016, 9:06 am
- Has thanked: 1344 times
- Been thanked: 3726 times
Re: BEVs and water
bungeejumper wrote:genou wrote:Another new thing learnt. They're all still here, so they must know something.
The laws of probability, I imagine. When a stressed steel cable does its one-in-a-thousand failure thing, you might not be around long enough to count the milliseconds.
Professionally, I'm sure those guys use the very highest quality cables, lovingly stored and regularly tested and inspected. In the real world, I can do no better than to just hope so.
BJ
Apparently they do not use steel cables but synthetic material that reacts differently. I have no idea whether this is true or not but I guess it's their limbs they are looking after.
They are from Utah however and I have seen plenty in the videos that suggest health and safety is treated a little less seriously there than here.
John
-
- Lemon Half
- Posts: 8538
- Joined: November 8th, 2016, 5:56 am
- Has thanked: 4537 times
- Been thanked: 3668 times
Re: BEVs and water
redsturgeon wrote:bungeejumper wrote:genou wrote:Another new thing learnt. They're all still here, so they must know something.
The laws of probability, I imagine. When a stressed steel cable does its one-in-a-thousand failure thing, you might not be around long enough to count the milliseconds.
Professionally, I'm sure those guys use the very highest quality cables, lovingly stored and regularly tested and inspected. In the real world, I can do no better than to just hope so.
BJ
Apparently they do not use steel cables but synthetic material that reacts differently. I have no idea whether this is true or not but I guess it's their limbs they are looking after.
John
Doesn't make it any easier to watch though!
I wince just thinking about it; but then I did have a Frankenstein neck scar for a couple of weeks after tuning the wrong guitar string (lent over the body trying to work out why the pitch wasn't changing )
-
- Lemon Half
- Posts: 8262
- Joined: November 8th, 2016, 2:30 pm
- Has thanked: 2928 times
- Been thanked: 4040 times
Re: BEVs and water
servodude wrote:I wince just thinking about it; but then I did have a Frankenstein neck scar for a couple of weeks after tuning the wrong guitar string (lent over the body trying to work out why the pitch wasn't changing )
Didn't do Hendrix any harm, did it? But then, maybe he was playing with his teeth at the time?
BJ (nylon strings on the guitar, steel on the lower end of the cello)
-
- Lemon Half
- Posts: 8538
- Joined: November 8th, 2016, 5:56 am
- Has thanked: 4537 times
- Been thanked: 3668 times
Re: BEVs and water
bungeejumper wrote:servodude wrote:I wince just thinking about it; but then I did have a Frankenstein neck scar for a couple of weeks after tuning the wrong guitar string (lent over the body trying to work out why the pitch wasn't changing )
Didn't do Hendrix any harm, did it? But then, maybe he was playing with his teeth at the time?
BJ (nylon strings on the guitar, steel on the lower end of the cello)
Cello strings could hurt!
Financially more than most other ways I suppose.
I've a friend whose daughter is starting out in the cello game and she's up for a new set every six months (then again the instrument is mortgaged!) I do what I can to help by lending her guitar pedals (she does a lot of self accompanying via looper)
-sd
Last edited by servodude on January 21st, 2022, 12:04 pm, edited 1 time in total.
-
- Lemon Quarter
- Posts: 2770
- Joined: November 5th, 2016, 3:03 am
- Has thanked: 173 times
- Been thanked: 1847 times
-
- Lemon Half
- Posts: 8538
- Joined: November 8th, 2016, 5:56 am
- Has thanked: 4537 times
- Been thanked: 3668 times
Re: BEVs and water
Hallucigenia wrote:You could make worse choices of an instrument :
...and I thought the embouchure was hard enough on a standard liquorice stick!
Return to “Cars, Driving, Motorbikes or any Transport”
Who is online
Users browsing this forum: No registered users and 15 guests